Optimizing the antioxidant biocompound recovery from peach waste extraction assisted by ultrasounds or microwaves

The possibility to valorize peach juice waste, either frozen or air-dried, through microwave (MAE) and ultrasound assisted extraction (UAE) was evaluated. MAE power, UAE amplitude and time were optimized using a 2²-factorial design. For frozen waste, optimal MAE (540 W, 50 s) and UAE (23%, 120 s) processes gave extracts presenting analogous content (on 100 g dry matter) of polyphenols (309–317 mg GAE), flavonoids (94–120 mg QE), anthocyanins (8–9 mg CGE), and similar antioxidant activity (2.1–2.2 mg TE). Extracts from dried waste resulted higher in polyphenols (630–670 mg GAE) but lower in flavonoids (75–90 mg QE), anthocyanins and vitamin C (not detectable). Although developing an energy density 2-fold higher than that of UAE, MAE more efficaciously extracted vitamin C (108 mg/100 g dm) and required half extraction time (50 s). MAE would also be less impactful than UAE in terms of greenhouse gas emission and energy requirements on industrial scale. The industrial valorization of peach waste through the application of microwave or ultrasound assisted extraction requires quantitative data, able to encourage company interest and investment. This study not only identifies optimal MAE and UAE parameters to assist the extraction of peach waste bioactive compounds but also provides a preliminary estimation of the potential economic and environmental impact on an industrial scale of these technologies.     

Environmental remediation by hydroxyapatite: Solid state synthesis utilizing waste chicken eggshell and adsorption experiment with Congo red dye

This study reports the adsorption efficacy of hydroxyapatite (HAp) for removing Congo Red (CR) dye from aqueous solution. HAp was synthesized utilizing chicken eggshell as a precursor of Ca source. Solid state synthesis method was implemented which comprised calcination at 950 °C (E-HAp950). XRD analysis confirmed the formation of bi-phasic HAp with 15.5% of β-TCP. Elemental composition was evaluated by XPS and EDX analysis. FESEM analysis revealed the particles are of plate and spherical shaped also confirmed by the TEM images. DLS particle size, zeta potential, BET surface area and point of zero charge were also evaluated. Adsorption efficacy of E-HAp950 for removing CR was evaluated by batch adsorption experiment. Maximum adsorption capacity (q_max) was found to be 9.64 mgg⁻¹ which was best explained by the non-linear fitting (R² = 0.98) of Langmuir isotherm. Adsorption kinetics profusely followed pseudo second order kinetic model (R² = 0.999) with q_{e (experimental)} being very much closer to q_{e (calculative)} for this model. Thus, hydroxyapatite prepared by utilizing eggshell waste through solid state method has the potential to remove toxic dyes.     

Extraction and characterization of highly pure alumina (α, γ, and θ) polymorphs from waste beverage cans: A viable waste management approach

The recycling and recovery of important materials from inexpensive feedstock has now become an intriguing area and vital from commercial and environmental viewpoints. In the present work, extraction of different single phases of alumina (α, γ, θ-Al₂O₃) having high purity (>99.5 %) from locally available waste beverage cans (～95 % Al) through facile precipitation route calcined at distinct temperatures has been reported. The optimization of process technology was done by a variety of different synthesis parameters, and the production cost was estimated between 84.47-87.45 USD per kg of alumina powder. The as prepared alumina fine particles have been characterized using different sophisticated techniques viz. TG-DTA, WD-XRF, XRD, FT-IR, SEM, DLS-based particle size analysis (PSA) with zeta (ζ) potential measurement and UV–Visible Spectroscopy. X-ray diffractogram confirms the formation of γ-, θ-, and α-alumina at 500–700 °C, 900–1000 °C, and 1200 °C respectively and crystallite size, crystallinity, strain, dislocation density, and specific surface area were measured using major X-ray diffraction peaks which varies with temperature. The SEM studies showed that the as prepared alumina particles were agglomerated, irregular-shaped with particle size (0.23–0.38 µm), pore size, and porosity were calculated from SEM image. ζ-potentials at different pH values as well as isoelectric point (IEP) of α, γ, and θ alumina were calculated in an aqueous medium which changes with temperature. The direct band gap (E_g) energies were found between 4.09 and 5.19 eV of alumina obtained from different calcination temperatures. The synthesized materials can be used in sensors, ceramics, catalysis, and insulation applications.     

Production of polyhydroxyalkanoate from sesame seed wastewater by sequencing batch reactor cultivation process of Haloferax mediterranei

Due to the high cost of bioplastic production, sesame wastewater, generated from the sesame seed hulling process, was investigated to be used as inexpensive and renewable carbon source for the production of biodegradable polyhydroxyalkanoate (PHA) by extreme Haloferax mediterranei. The sesame wastewater (SWW) was hydrolyzed using different concentrations of hydrochloric acid (0.4. 1.00 and 2.00 M) at different period of times (15, 60 and 90 min). The concentration of salt (NaCl) and nitrogen source (NH₄Cl and yeast) required for H. mediterranei cells growth and the accumulation of PHA biopolymer was optimized. A maximum 0.53 g/L concentration of PHA was achieved when the SWW extract media was supplemented with 100 g/L NaCl and 6.0 g/L yeast extract. The cultivation was scaled-up using sequencing batch reactor (SBR) fermentation under non-sterile conditions. The SBR results showed that SWW needs an auxiliary carbon source to obtain high PHA production. Consequently, the system fed with SWW and glucose produced higher PHA (20.9 g/L) than the system fed with SWW.     

Recycling of polyethylene terephthalate (PET Or PETE) plastics – An alternative to obtain value added products: A review

Waste management is become one of the world's most pressing issues. Plastic is one of the most widely utilised materials in the modern world. Plastic manufacturing and usage have risen globally in recent decades due to its low weight and outstanding mechanical properties. Plastic has a wide range of applications due to such good properties include lightweight, high strength, and extended durability. Because of plastics are non- or low-biodegradable, a vast quantity of plastic waste is generated every day, making waste disposal the most pressing matter globally. Furthermore, improper waste disposal pollutes the environment. An ecologically friendly approach is necessary to locket these issues. One of the solutions is to recycle this sort of garbage. There are many plastic recycling technologies available, however practically all of them have certain restrictions. Chemical recycling of plastic, on the other hand, has been shown to be more efficient than other recycling methods. This article provides a quick overview of chemical recycling of PET post-consumer waste and the synthesis of potentially value-added products such as dye or dyestuffs, bolaform surfactant, bio-degradable polyesters, drug carrier, Metal-organic framework (MOF), bio-degradable polymeric scaffolds, polyurethane foam and coating materials etc.     

四种无机纳米颗粒对塑料抗紫外性能的研究进展

无机纳米颗粒在塑料抗紫外的研究中一直备受关注,主要介绍了四种(TiO₂、ZnO、SiO₂、CeO₂)典型的无机纳米颗粒在该领域的应用。首先归纳了其既能吸收又能反射或散射紫外线的抗紫外机理;其次,分别论述了不同无机纳米颗粒适用的紫外光波长范围,以在塑料中的添加方法和应用特点为主线,重点介绍了国内外四种无机纳米颗粒在塑料抗紫外性能中的研究现状和进展;最后,将四种无机纳米颗粒在塑料抗紫外性能中的应用特点进行了对比,提出了应用过程中存在的分散和相容性差等问题,以期为无机纳米颗粒的深入应用和发展提供一定的参考。     

Residue valorization: Preparation of recyclable organic amine adsorbent using laterite residue

This study focuses on exploiting the main component of traditional nickel metallurgical waste for use as a valuable material that can be applied in the removal of organic amines from water systems. Silicon compounds from metallurgic waste were converted into dissolvable sodium silicate by roasting the waste with alkali. Silica with adsorption capacity was combined with magnetic NiFe cores by the carbonation decomposition of purified silicate solution. The composite magnetic adsorbent was characterized, and its adsorption mechanism for organic amines was investigated. The effects of the initial trimethylamine concentration, contact time and temperature on the adsorption efficiency of the composite adsorbent towards trimethylamine were investigated. It was found that the adsorption fit the Freundlich mode well. The adsorption kinetics can be described by a pseudo-second-order kinetic model. The adsorption capacity reached 55.8 μg/mg at 293 K. The use of metallurgical waste to prepare the magnetic composite adsorbent has three advantages, which include benefiting the environment by reducing the amount of solid waste and costs associated with constructing and maintaining storage facilities, generating valuable products in an economical manner and conveniently recycling used adsorbents to avoid secondary pollution.     

Novel utilization of waste marine sponge (Demospongiae) as a catalyst in ultrasound-assisted transesterification of waste cooking oil

This study demonstrates the potential of Na-silica waste sponge as a source of low cost catalyst in the transesterification of waste cooking oil aided by ultrasound. In this work an environmentally friendly and efficient transesterification process using Na-loaded SiO₂ from waste sponge skeletons as a solid catalyst is presented. The results showed that the methyl esters content of 98.4 ± 0.4 wt.% was obtainable in less than an hour (h) of reaction time at 55 °C. Optimization of reaction parameters revealed that MeOH:oil, 9:1; catalyst, 3 wt.% and reaction duration of 30 min as optimum reaction conditions. The catalyst is able to tolerant free fatty acid and moisture content up to 6% and 8%, respectively. In addition, the catalyst can be reused for seven cycles while maintaining the methyl esters content at 86.3%. Ultrasound undoubtedly assisted in achieving this remarkable result in less than 1 h reaction time. For the kinetics study at 50–60 °C, a pseudo first order model was proposed, and the activation energy of the reaction is determined as 33.45 kJ/mol using Arrhenius equation.     

The investigation of neutralization process of gas-phase sewage sludge using thermal plasma method

The purpose of this research is to investigate the influence of plasma flow on the composition of gaseous phase organic waste. The experimental method and simulation program “Chemical Workbench” were used for this research. The gas phase waste was neutralized using air plasma in the temperature range of 1200–1700 K. The reactor simulation results showed that the amount of atomic oxygen and nitrogen decreases by 0.5%, meanwhile the amount of carbon monoxide increases by 0.5 percent, as the plasma forming gas is air. The investigation of percentage concentration results showed that as the temperature reaches 1700 K, the H₂ decreases by 4%, CO increases by 7%, CH₄ decreases by 0.4%, CO increases by 0.5%, N₂ decreases by 5%. The experimental measurement results of percentage concentration correlates sufficiently with simulation results for listed gas.